V2 VV/VW - with RMS MODE 1+2 and metal buttons. VERSION 2
VV650 VAMO Mod (body only)
This device is getting rave reviews for being the cheapest variable wattage vv device that seems to perform really well.
It can work with 1 x 18350 or 2 x 18350 or 1 x18650 battery
please note: not all 18650 batteries are big enough to fit properly
This device is a variable voltabe and variable wattage device.
It has a dual mode setting.
Dual Mode VV or VW 1: constant voltage. In this mode, APV adjusts from 3.0 to 6.0 Volts in .1 volt increments. 2: constant power. In this mode, APV adjusts from 3.0 to 15 Watts in .5 Watt increments. Change modes by holding up and down -&+ buttons at the same time for 3 seconds.
Why is this good? Generally speaking increasing the wattage instead of the voltage allows this unit to adjust to the resistance setting of your atomizer. This can result in better use in lower ohm resistance atomizers and help reduce the any burning of e-liquid whilst maintaining an extra boost of vapor production.
This is a brass body mod with chrome finish and is very solid feeling and quite heavy compared to lavatubes.
instructions Atomizer Resistance Checker - Hold the + button for 3 seconds.
Battery Power Check - Hold the - button for 3 seconds.
5 click on off feature - Trigger
Safety features: When you press the button 10 seconds or more, eGo APV will turn itself off automatically. When a single batteries voltage is less than 3.2v or dual 18350 batteries voltage is less than 6.4v, the screen will display LO v, which indicates that the batteries need to be recharged. Atomizers at 1.2ohm or less, the screen will display LO Ω, which indicates that you need to use a new atomizer at higher resistance. Atomizer short circuit，the screen will display LO v. Incorrect battery installation protection.
Again please note;-
This unit may not fit all 18650 batteryies. Users speak of some adjustmetnt to the spring (we do not recommend this) or using a magnetic spacer to make the connection.
UPDATE: We can confirm the factory has extended the spring to suit most 18650 batteries much better!
it can also be easily shortened and used with most 18350 batteries. if the batteries are older and the settings are wrong you may get a Lo warning and require better suited batteries.