KSD K-Max Hybrid Mod
2013 newest hybrid mod One Button,7 Menus!! Wanna try? You ‘ll fall in love with it !!
2013 newest hybrid mod One Button,7 Menus!! Wanna try? You ‘ll fall in love with it !!
Kmax
Here it Finally is.
The KSD Kmax Hybrid mod.
Complete with hidden screen that only shows through the tinted tube when in operation. Really very cool!!!
Check out some of the reatures in the video above, and the specs below....
1 Great design! Body and tube (PCB control) can be separated for cleaning and access. Tube may also be used on some other mechanical mods. A protective circuts in the the PCB enables safer operation than mechanical mods.
2 Should fit all ego/510 threaded atomziers (drip well sleve is removable)
3 Powerfull VV and VW functions and readings of batteries and atomizer resistance etc.
K-max Functions
1.Output voltage from 3V-6V.
2.Output wattage from 3W-15W.
3.Can measure the resistance of atomizers
4. LCD displays “HHH” when the voltage is too high .
5. When the LCD displays “123456789”,the Kmax is in standby mode.
6.Time limit protection: It will shut down when more than 10s each puff.
7. When the single-battery voltage is lower than 3.3V or double-batteries voltage is lower than 6.5V, the screen will show LoU as a reminder of recharging the battery.
8.One button with 7 menus.
9.Reverse battery protection keeps circuit safe if the battery is installed improperly.
10.The bottom is explosion proof, safer!!
11.Armature Current<=50uA
Name | Kmax |
Body color | Chrome ,Black Chrome,Brass |
Tube color | Chrome, Gold ,Red, Green, Black |
Battery | 18650, 18350, 18500 |
Thread | 510/ego thread |
Voltage | 3.0v – 6.0v |
Wattage | 3.0w – 15w |
Button Function: (triple click the button to access the menus) there are 7 levels of menu...
Menu Setting (Indication) | Function | Operation Instruction |
“1.Uu”--Voltage up | Menu 1 | In standby mode, press the button 3 times continuously , LCD shows“1.Uu/1.Pu”,release the button ,it comes to the menu 1,adjust the voltage or wattage up in 0.1v/0.5w. It will rotate back to 3.0 and go up again when it reach 6.0v( or 15w) |
“2.Ud”--Voltage down “2.Pd”--Wattage down | Menu 2 | In standby mode, press the button 4 times continuously , LCD shows“2.Ud/2.Pd”,release the button ,it comes to the menu 2,adjust the voltage or wattage down in 0.1v/0.5w. |
“3.S.o”--Standby on/off | Menu 3 | In standby mode, press the button 5 times continuously ,LCD shows“3.So”, release the button ,it come to the menu 3,choose “S.on” or “S.oF”.LCD will display “---”and system locked when you choose “S.oF”, repeat it and choose “S.on” to restart the system. |
“4.Uc” | Menu 4 | In standby mode, press the button 6 time continuously ,LCD shows”4.Uc”, release the button ,it come to the menu 4,LCD will display the voltage of the battery. |
“5.ds”--Display change, “d.R”atomizer resistance “d.u” battery voltage | Menu 5 | In standby mode, press the button 7 times continuously ,when the LCD shows”5.Uc”, release the button ,it come to the menu 5,choose “do/dR/du”, “do”: output voltage “dR”: atomizer resistance “du”: battery voltage |
“6.Lo”LED Display on/off Option: “L.on”-ON, “L.oF”-OFF | Menu 6 | In standby mode, press the button 8 times continuously, when the LCD shows “6.Lo”,release the button, choose “L.on” or“L.oF”, “L.on” :LCD on when smoking. “L.oF”: LCD off when smoking. |
“7.UP”Voltage or Wattage | Menu 7 | In standby mode, press the button 9 times continuously, when the LCD shows “7.UP”,release the button, choose “Po” or “Uo”, “Po”: Power(wattage) “Uo”: Voltage |
Short Circuit |
| "F1/F2"-- Short circuit protection when you start the device, please replace the atomizer. |
Enjoy the new Kmax from vaporbreak.com